Bulk supply · Solvents & Organic Chemicals
Mono ethylene glycol in ISO tank and drum, supplied to polyester, coolant and gas-processing users across India. Price and availability on request.
Also searched as: mono ethylene glycol price, ethylene glycol price, MEG price, MEG chemical, MEG fibre grade
What we supply
MEG's dominant use has nothing to do with antifreeze — the overwhelming majority goes into polyester, as one of the two feedstocks for PET resin and polyester fibre. India's textile industry is a very large consumer, which is why MEG availability tends to track what polyester is doing.
Its other duties trade on the same property: it lowers freezing point and holds water. That makes it the coolant and antifreeze base, and the hydrate inhibitor injected into natural gas pipelines and low-temperature separation trains. Note that hydrate inhibition is not the same job as gas dehydration — contactor and regenerator dehydration uses triethylene glycol, a different product. Velora supplies MEG in ISO tanks and drums.
Grades & packing
These are the formats we most commonly supply. Other concentrations, packing sizes and pack marking are available — ask at the enquiry stage.
| Product | Formula | Grade | HSN | Packing |
|---|---|---|---|---|
| Mono Ethylene Glycol | C₂H₆O₂ | 99.9% MEG fibre grade | 2905 31 00 | ISO tank · 230 kg drum |
No tested values are published here. The certificate of analysis for the batch actually loaded travels with the despatch documents, and a representative COA and the safety data sheet go out before any commercial discussion.
Applications
Feedstock for PET resin and polyester fibre — the largest use by far.
Base fluid for engine coolant and industrial heat transfer.
Hydrate inhibition in pipelines and low-temperature separation. Contactor dehydration is a TEG duty, not MEG.
Secondary refrigerant in low-temperature circuits.
Unsaturated polyester and alkyd resin manufacture.
Humectant and solvent in inks and formulations.
Handling & storage
Worth reading before you order rather than after. If any of this is a problem at your site, tell us — it usually changes what we would quote.
Price
MEG is made from ethylene and so tracks crude and naphtha, but the sharper driver is polyester demand, because that is where most of it goes — when polyester runs hard, MEG tightens regardless of what oil is doing. India imports a large share, so freight and currency matter too. ISO tank versus drum makes a real difference at volume.
Questions
MEG goes into polyester and coolants, and is injected as a hydrate inhibitor. DEG goes into resins. TEG is the glycol for gas dehydration in contactor service — if that is your duty, MEG is the wrong product. MPG (mono propylene glycol) is the one to use wherever the fluid may contact food, pharmaceutical product or people, because MEG is toxic. Do not substitute MEG into an application that specifies MPG.
No. MEG is toxic if ingested. Where a glycol may contact food, beverage, pharmaceutical product or skin, the correct material is mono propylene glycol at the appropriate grade. We supply MPG as well — tell us the application and we will quote the right one.
Tell us the application and the parameters your process controls, and we will confirm what we can source against them in writing before quoting.
MEG is quoted per kg or per tonne, landed, and follows international glycol pricing closely, so written offers carry a short validity. ISO-tank loads work out cheaper per kg than drums.
Send grade, monthly quantity and delivery point to our Ahmedabad desk. We supply MEG fibre grade in ISO tanks and drums across India and on export.
The HSN code for mono ethylene glycol (MEG) is 2905 31 00 (Ethylene glycol (ethanediol)). Source: the Indian customs tariff as listed in the GST HSN directory, checked September 2026.
Related lines
Sourcing desk
You will get a written offer for mono ethylene glycol with landed price, packing, lead time and a stated validity — not a price that changes on the phone.