Bulk industrial chemicals  ·  Ahmedabad, Gujarat, India
+91 99255 22674  ·  info@velorachemicals.com  ·  CIN U46691GJ2025PTC164019

Bulk supply · Surfactants & Oleochemicals

Stearic Acid C₁₈H₃₆O₂

Triple-pressed stearic acid in 40, 50 and 60 grades, in 25 kg bags, for rubber, PVC, candle, cosmetic and detergent makers. Price on request against your quantity and delivery point.

Also searched as: stearic acid price, stearic powder, triple pressed stearic acid, octadecanoic acid

What we supply

Stearic Acid in bulk, against a written specification.

Stearic acid is a solid fatty acid made by splitting and fractionating fats and oils — in India most commonly palm stearin, though tallow-based material is also traded. Where feedstock origin matters to you, for a vegetable-origin, halal or kosher declaration, say so at the enquiry stage: it is confirmed from the producer's documentation for the specific lot, not assumed. The trade grades — 40, 50 and 60 — describe how much of the product is stearic acid rather than palmitic: the higher the number, the more stearic and the higher the melting range.

Triple pressing is a fractionation step: it strips out the liquid unsaturated fatty acids, so triple-pressed material carries a low iodine value and a harder, more consistent melt. Colour and odour are set separately, by distillation and bleaching, which is what candle and personal-care buyers are really specifying. All three grades we offer are triple pressed, in 25 kg bags; rubber and PVC users normally take grade 40 because cost per tonne matters more to them than colour or melting point.

Grades & packing

What goes out, and how it is packed.

These are the formats we most commonly supply. Other concentrations, packing sizes and pack marking are available — ask at the enquiry stage.

ProductFormulaGradeHSNPacking
Stearic AcidC₁₈H₃₆O₂Triple pressed, 40/50/60 grades3823 11 0025 kg bag

No tested values are published here. The certificate of analysis for the batch actually loaded travels with the despatch documents, and a representative COA and the safety data sheet go out before any commercial discussion.

Applications

Where stearic acid earns its place.

Rubber

Activator with zinc oxide in the cure system, and a processing aid that improves filler dispersion.

PVC & plastics

Lubricant and co-stabiliser in PVC compounding.

Candles

Hardener that raises the melting point and improves burn quality.

Cosmetics & soap

Emulsifier and structuring agent in creams, lotions and soap, where a cosmetic grade is specified.

Detergents & textiles

Softener and lubricant intermediate, and a feedstock for metallic stearates.

Handling & storage

What to get right before the load arrives.

Worth reading before you order rather than after. If any of this is a problem at your site, tell us — it usually changes what we would quote.

Site notes

  • Store bags in a cool, dry, covered store. Stearic acid is a solid at room temperature and softens as it warms, so stacked bags can block together in Indian summer heat — keep stacks low and out of direct sun.
  • Not classified as dangerous goods for transport in bags, but it is a combustible organic solid: airborne dust from bag tipping or grinding can form an explosible cloud, so earth and bond transfer equipment, control ignition sources and do not let dust settle on hot surfaces.
  • The dust and molten material irritate skin and eyes, and molten stearic acid causes burns — gloves and a face shield at melt tanks.
  • Keep it away from strong oxidisers and strong acids.

Price

What actually moves the stearic acid price.

Stearic acid follows palm oil and palm stearin prices, plus the cost of splitting, distillation and pressing, so it moves with the vegetable-oil market rather than with petrochemicals. Grade (40, 50 or 60), colour, and bag versus bulk set the rest. We quote per kg in writing with a stated validity.

Questions

Stearic Acid — what buyers ask us.

What is the difference between stearic acid 40, 50 and 60?

The number is roughly the stearic acid content, with the balance mostly palmitic acid. Grade 60 is the most stearic and has the highest melting range; grade 40 is cheaper and suits rubber and industrial use where colour and melting point matter less.

What is the stearic acid price per kg?

It is quoted per kg, landed, and follows palm oil and palm stearin prices, so offers carry a stated validity. Tell us the grade, quantity and delivery point for a written offer.

Do you supply cosmetic-grade stearic acid?

Tell us the specification you work to and we will confirm what we can source for that lot. Cosmetic and pharmacopoeial grades carry their own certification, which we confirm before you order rather than assume.

What is the stearic acid price per kg?

Stearic acid is quoted per kg, landed, and follows palm oil and palm stearin prices, so offers carry a stated validity. Grade 60 costs more than grade 40.

Are you a stearic acid manufacturer?

No — Velora is a bulk supplier. Stearic acid is sourced from established oleochemical producers and supplied in 25 kg bags.

What is the HSN code for stearic acid?

The HSN code for stearic acid is 3823 11 00 (Stearic acid (industrial monocarboxylic fatty acid)). This is the line for commercial stearic acid, a mixture of stearic and palmitic acids. High-purity, separately chemically defined stearic acid — pharmacopoeial and some cosmetic grades — is classified under 2915 70 20 instead. Confirm the heading with your own tax adviser. Source: the Indian customs tariff as listed in the GST HSN directory, checked September 2026.

Related lines

Often bought alongside.

Sourcing desk

Tell us the grade, tonnage and delivery point.

You will get a written offer for stearic acid with landed price, packing, lead time and a stated validity — not a price that changes on the phone.